Bug Vac or Super Pooter
Size: about 1.5 m
Shows top side of mouthpiece with slot that fits over bolt in wand, allowing tightened wingnut to clamp it in place.
I tried various glues, cements and an epoxy putty attempting to join the two plastic items, bowl and leachline coupling. I finally resorted to using small screws plus epoxy glue.
Around the bowl rim you can see the heads of the screws holding the wire nut "rake teeth" in place on the underside. I reinforced the rim with epoxy putty at each screw location and used a small washer to guard against the screw heads breaking through the plastic bowl rim.
Images of this individual: tag all